We are the Leading Supplier of Shipbuilding Marine Steel EH36 | AH36 | DH36.
ABS EH36 Steel Plates is used in shipbuilding industry both in hull construction and in the superstructure itself.

We supply and export to Singapore, Indonesia, Brunei and other ASEAN Countries.
Our specialty to provide wide range of stainless steel with no minimum order(MOQ)

ABS EH36 Steel Plate Suppliers-Shipbuilding Marine Steel,Ship Plate for Marine Industry

Steel Plate Grade EH 36 - E Steel is the supplier of high-quality EH36 structural steel plate to the shipbuilding industry.Our EH36 Steel is with the Japan Origin

The material is available as heavy plates or sheets and pre-fabricated steel sections.The steel can also be pre-treated.EH36 is widely used in the shipbuilding industry both in hull construction and in the superstructure itself

Chemincal Composition of EH36 Steel Plate

Chemical	Percentage (100%)
C	0.18
Si	0.10 / 0.50
Mn	0.90 / 1.60
P	0.035
S	0.035
Cr	0.20
Mo	0.08
Ni	0.40
Cu	0.35
Cb	0.02 / 0.05
V	0.05 / 0.10

Common Used High Strength in offshore & Marine
For the high strength shipbuilding plates like AH36, DH36, EH36 steel plate, they have been widely used in high stress areas of ships,comparing withgeneral strength steel, they are offering the same strength with the smaller thickness.
There are different grades of Shipbuilding Plates,as shown below.

Comparison of Different Grades Shipbuilding Plates

According to its yield strength, shipbuilding plates of can be divided into below grades:

• Grade A steel is the impact force subjected to normal temperature(20°c)
• Grade B steel impact force at 0°c
• Grade D steel impact force at -20°c
• Grade E steel impact force at -40°c

High-strength shipbuilding steel plates can be further divided into:AH32, DH32, EH32 ; AH36, DH36, EH36 and AH40, DH40, EH40,

1. The general grades A, B, D and E are distinguished according to the impact temperature of the steel,The impact values of all grades of steel are the same
2. High-intensity hull structure steel preheating requirements: For all AH, DH, EH plate thickness greater than 30mm angle, butt joints, shall be preheating to 120 ~ 150 °C before welding.
3. For thickness of the plate ≤ 30mm, the ambient temperature is below 5 ° C, preheated to 75 ° C; Ambient temperature below 0 ° C, preheated to 75 ~ 100 ° C.

Comparison of proceesing for different grades of Shipbuilding Steel Plates

Grade A and B
The general strength of grade A and B shipbuilding steel plates can meet the requirements of process and mechanical properties through ordinary rolling, so the production process is relatively simple.

Grade D and E (DH32, DH36, EH 32, EH 36)
Grade D and E series (inlcuding AH32/36, DH32, DH36, EH32, EH36) shipbuilding steel plates require good low temperature toughness and good welding performance. The production high-strength shipbuilding steel plate needs to be normalized by means of controlled rolling and controlled cooling or heat treatment processes with more complete equipment. At the same time, the internal steel purity of the supplied billets is required to be high, especially the content of S, P, N, 0 and H in the steel should be strictly controlled.

ABS Grade A Marine Shipbuilding Plate Suppliers - Shipbuilding Steel, Sheet Plate for Marine Indusry

E Steel supplies total 60tons of shipbuilding marine plate ABS Grade A to the Kikeh Platform for repairing deck works. 



Our Sales and Supplier Network

Australia, Pakistan,  Malaysia, Singapore, Taiwan, China,Vietnam, Belgium, Japan, South Korea, Philippines, France, United Kingdom, Indonesia, Thailand, Hong Kong, China, Sweden, United States, Dubai, Finland, Brunei,Germany.

E Steel is a Global Metal Procurement Company in providing and sourcing raw materials to the wide range of engineering industries / sectors.  We works as the the Online B2B Metal Marketplace to help our customers in finding the special steels that might feel hard to source locally.